Datasheet

APEM www.apem.com B2-91
B2
AV series
Tactile security pushbutton switches Ø 19 mm (.748)
Illuminated and non-illuminated - momentary (NO)
Flat actuator - illuminated
Solder lug terminals
AV09C7L3D2
Screw terminals
AV09C7L3D9
NO
(function 3)
SPECIFICATIONS
• Travel : 0,7 mm (.027) ±
0,1 mm (.003)
• Max. current/voltage rating with resistive load : 50mA 24VDC
• LED voltage and consumption : 2-colour LED : 2V (3V max.) 20mA
Other colours : 2V (3V max.) 10mA
A resistor must be series-connected by the user **
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 500 Vrms 50 Hz min. between terminals
2.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 1.000.000 cycles at full load
• Operating force : 7 N ±-2N
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -30°C to +70°C
• Hand soldering : 270°C, 3 seconds max.
• Packaging unit : 40 pieces
** Resistor value =
supply voltage - LED forward voltage
LED forward current
Flat actuator - non-illuminated
Hex nut 22 (.866) across flats
Solder lug terminals
AV09C703D2
Screw terminals
AV09C703D9
Also available with curved actuator :
AV19C703D2 or AV19C703D9
MATERIALS
• Case : PBT UL94-V0
• Terminals : brass, gold plated
• Contacts : gold plated dome
• Bushing and actuator : see next page
• LED
CUT-OUT
• Panel cut-out : Ø 19,2 mm
(.755)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
(.074)
1.90
(.153)
3.90
(.043)
1.10
Ø19.00x1.00 SI
4
.00
Ø22.00
Ø15.00
2.00
13.50
(.866DIA) (.590DIA)
(.748DIAx1.00 IS)
(.157)
(.078)
(.531)
(.163)
4.15
(.590DIA) (.866DIA)
Ø15.00
Ø22.00
CAVDTL-1A
EPOXY
(.519)
13.20
13.50
(.531)
(.078)
2.00
(.531)
(.078)
(.157)
(.748DIAx1.00 IS)
(.590DIA) (.866DIA)
13.50
2.00
Ø15.00
Ø22.00
4.00
Ø19.00x1.00 SI
CAVDTL-2A
1.10
(.043)
3.90
(.153)
4.15
(.163)
1.90
(.074)
(.393DIA)
Ø10.00
EPOXY
(.590DIA) (.866DIA)
Ø15.00
Ø22.00
(.078)
2.00
(.519)
13.20
13.50
(.531)
ORDER FORMAT
To order a product, select a basic
model below and add the desired
options selected on next page.
Hex nut 22 (.866) across flats
+
-
See next
page
Actuator type
09 Flat
19 Curved
S
ERIES
Case
Illumin.
0 No
L Illum.
Function
Terminals
2 Solder
9 Screw
AV C7 3
Contact
D OPTIONS