Datasheet

B2-104 APEMwww.apem.com
B2
AV series
Security pushbutton switches Ø 22 mm (.866) or 24 mm (.944) with large actuator
Momentary (combined NC+NO)
Combined NC+NO
Recessed actuator - AV22LC
Quick-connect terminals
AV22LC••4
Solder lug terminals
AV22LC••2
Curved actuator - AV22LB
Quick-connect terminals
AV22LB••4
Solder lug terminals
AV22LB••2
SPECIFICATIONS
• Max. current/voltage rating with resistive load : 5A 250VAC
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 1.000.000 cycles at 1A 250VAC
100.000 cycles at full load
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -20°C to +55°C
• Low level or mechanical life : 3.000.000 cycles
• Front panel sealing : IP65
• Hand soldering : 300°C, 5 sec. max.
• Packaging unit : 20 pieces (except black chrome plated : 16 pieces)
MATERIALS
• Case : polyester, glass filled
• Contacts : silver/nickel alloy
• Bushing and actuator :
see next page.
CUT-OUT
• Panel cut-out : Ø 22,2 mm
(.874) or Ø 24,2 mm (.952)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
or 33 mm x 33 mm (1.299x1.299)
Flat actuator - AV22LP
Hex nut 25 (.984) across flats
1.30
(.051)
Ø20.00
(.787DIA)
(.141)
3.60
4.00
(.157)
(.019)
0.50
Ø22.00X1.00 SI
(.866DIAX1.00 IS)
Ø26.00
(1.023DIA)
12.80
(.503)
12.50
(.492)
(.118)
3.00
(.250)
2.40
(.279)
(.110X.019)
2.80X0.50
7.10
Quick-connect terminals
AV22LP••4
Solder lug terminals
AV22LP••2
BASIC MODEL
To order a product, select a basic model below or on next page and add the desired bushing/actuator materials.
➞
O-ring
ORDER FORMAT
Bush./actuator
material
See next page
Bushing
diameter
22 22 mm
24 24 mm
SERIES
Bush./act.
config.
Act. style
P Flat
B Curved
C Recessed
AV L
Terminals
4 Quick-
connect
2 Solder lug
OPTIONS
14bis-Serie AV-2-A_18-Serie AV-A 31/10/14 09:01 Page104