Datasheet

APEM www.apem.com B2-87
B2
AV series
Security pushbutton switches Ø 19 mm (.748)
With illuminated ring - momentary (NC/NO)
SPECIFICATIONS
• Travel : 2 mm ± 0,3 mm (.003)
• Max. current/voltage rating with resistive load : 1A 30VDC
• LED voltage : 12VDC, 24VDC or 48VDC
(If not supplied by APEM, a resistor must be series-connected by the user)**
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 10 MΩ min. at 500VDC
• Dielectric strength : 500 Vrms 50 Hz min. between terminals
1.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 250.000 cycles at full load
• Operating force : 5N ± 2N
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Low level or mechanical life : 1.000.000 cycles
• Operating temperature : -30°C to +85°C
• Hand soldering : 350°C, 5 seconds max.
• Packaging unit : flying lead/cable models : 1 piece - other models : 40 pieces
** Resistor value =
supply voltage - LED forward voltage
LED forward current
MATERIALS
• Case : polyamide, glass filled
• Contacts : silver
• Bushing : see next page
• Actuator : see next page
• Elastomeric membrane : silicone
• LED
CUT-OUT
• Panel cut-out : Ø 19,2 mm (.755)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
NC/NO
ORDER FORMAT
Flat actuator - solder lug terminals
Hex nut 22 (.866) across flats
Illuminated (select LED colour above) *
AV9•022 ON - MOM
Non-illuminated
AV90022 ON - MOM
Bushing dia. 19 mm
SERIES
LED colour
0 : no LED - 1 : blue - V : green
5 : yellow - 6 : red - 7 : white - 9 : amber
LED resistor
0 No resistor supplied
1 12VDC resistor
2 24VDC resistor
4 48VDC resistor
Contacts
2 Silver
AV
2
Terminals
2 Solder /
quick-connect
F Flying leads
C Cable
9
To order a product, select a basic
model below and add the desired LED
colour and voltage. Then select the
desired options on next page.
Options : see next page.
Flat actuator - flying lead terminals
Hex nut 22 (.866) across flats
Illuminated (select LED colour & resistor
above)
AV9••2F ON - MOM
Non-illuminated
AV9002F ON - MOM
* No LED resistor supplied on this model.
3.00
(.118)
22.00
(.866)
(.086)
2.20
(.456)
11.60
(.326)
8.30
Ø22.00
(.866DIA)
(.110x.019)
2.80x0.50
NO
NC
NO
NC
(.748DIAx1.00 IS)
Ø19.00x1.00 SI
(.476)
12.10
+
-
3.00
(.118)
(.086)
2.20
(.456)
11.60
Ø22.00
(.866DIA)
(.748DIAx1.00 IS)
Ø19.00x1.00 SI
Ø15.00
(.590DIA)
(.472DIA)
Ø12.00
12.10
(.476)
(7.874)
200
Wire colours : black: NC, orange: NO, red: LED anode (+), blue : LED cathode (-)
14-Serie AV-1-A_18-Serie AV-A 31/10/14 09:02 Page87