Datasheet

B2-86 APEMwww.apem.com
B2
AV series
Security pushbutton switches Ø 19 mm (.748)
Momentary (NC/NO)
Solder lug terminals - AV19..407
4213
Ø19.00X1.00 SI
(.748DIAX1.00 IS)
12.60
(.496)
3.60
(.141)
13.10
(.515)
Ø22.00
(.866DIA)
Ø15.00
(.590)
2.00
(.078)
3.60
(.141)
1.50
(.059)
0.50
(.019)
2.00
(.078)
Ø15.00
(.590)
Ø22.00
(.866DIA)
SPECIFICATIONS
• Max. current/voltage rating with resistive load :
5A 250VAC - 5A 125VAC - 6.000 cycles
5A 15VDC - 3A 30VDC - 50.000 cycles
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between term. and frame
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 9 mm (.354) max.
• Operating temperature : -20°C to +85°C
• Low level or mechanical life : 1.000.000 cycles
• Front panel sealing : IP65 and IP69K
• Packaging unit : 20 pieces
Combined NC/NO
4213
ORDER FORMAT
Series Bushing
diameter
Bush./act.
config.
Actuator
style
Bush./act.
matl
Contact/
terminals
AV 19
P
B
See below
L 40 7
MATERIALS
• Case : PA 6/6
• Contacts : silver
• Bushing : stainless steel (std)
• Actuator : stainless steel (std)
CUT-OUT
• Panel cut-out : Ø 19,2 mm (.755)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
Hex nut 22 (.866) across flats
Flat actuator
AV19LP407
Curved actuator
AV19LB407
BASIC MODEL
All model numbers below are for switches with standard bushing/actuator material.
➞
O-ring
CODE BUSHING ACTUATOR
00 Nickel plated brass Nickel plated brass
20 Chrome plated brass Chrome plated brass
BUSHING/ACTUATOR MATERIALS
For non-standard material, replace 40 with one of the following codes.
14-Serie AV-1-A_18-Serie AV-A 31/10/14 09:02 Page86