Datasheet

G-10 APEMwww.apem.com
A01 series
Emergency stop switches
Panel cut-out Ø 16 (.630)
G
60 mm Ø Self
Adhesive Label
(1.654) (1.047)
(.020)
(.709)
(.110)
(.709)
(.602)
(.472)
19.0042.00
15.30
12.00
0.50
18.00
2.80
18.00
(.330)
8.40
C D
(.945 DIA)
Ø24.00
Ø40.00
• Prominent 24 mm (.944) dia. or optional 40 mm (1.575) dia. red mushroom actuator
• Highly reliable positive break switch
•
Push to shut off switch, twist to reset to ON
• Approved to UL 1054 / EN 60947-5-1
An emergency stop switch assembly requires : operator + switch block.
To order, specify with single pole or double pole positive break switch block.
N.C.
Operator Switch block
Accessory
❶
❷
General specifications
• Min. mechanical life : 6.050 cycles (6 cycles per minute)
• Operating force / torque : 16 N / 0,1 Nm
• Operating temperature : -20°C to +55°C
• Solder heat resistance : 350°C, 5 secs (IEC 68-2-2-20Tb, method 2)
• Degree of environmental protection (IEC 529) :
IP65 front of panel, IP40 back of panel
• Switch terminals : solder/quick-connect 2,8 mm (.110) (IEC 68-2-20)
Electrical specifications
• Current/voltage rating :
1,5A 250VAC AC-15
• Contact gap : > 3 mm (.118)
• Dielectric strength : 2.900V
• Electrical life : 6.050 cycles
Option : SP3 version
No of poles Part No
Single pole A0150BUL
Double pole A0154BUL
Description Part No
24 mm Ø Emergency stop A01ES
40 mm Ø Emergency stop A01ES SP3
Description Part No
Yellow label with text A01YL1
Yellow label A01YL2