Datasheet

APEM www.apem.com A-89
A
600H and 600NH series
Toggle switches - high amperage
Specifications
AGENCY APPROVALS
Availability : see chart on previous page.
Marking : approved models are standard marked.
PANEL CUT-OUT
MOUNTING RECOMMENDATIONS
Connection
• For quick-connect terminals, use 6,3 x 0,8 mm
normalized female connectors.
• For screw terminals, use :
either 1,5 mm
2
or 2,5 mm
2
rigid wires,
or prepared stripped and tin plated flexible wires,
or prepared flexible wires with crimped termination per
EN 50027 (DIN 46228)
Ground connector
Compulsory if the panel is not metallic or not connected
to ground. Should also be used when front face nut is of
plastic material.
Order separately, see section I.
(.20)
(.066)
(.48DIA)
1.70
Ø12.20
5.10
(.377)
Ø12.50
(.492DIA)
(.137DIA)
Ø3.50
9.60
Ø12.20
(.48DIA)
EN 61058-1 EN 61058-1
13-Serie 600H-600NH-A_16-Serie 600H-600NH-A 30/10/14 15:20 Page89