Datasheet

ManualsBrandsApem ManualsSwitchesMiniature Toggle Switch ON-OFF-ON

A-22 APEM www.apem.com

5000 series

Toggle switches

Distinctive features

THE WIDEST RANGE IN MINIATURE SWITCHES

❑❑

17 actuators including toggles, paddle levers and locking levers

in different lengths.

❑❑

5 contact materials from dry circuit to 6A 125VAC

and high inrush up to 120A 2 ms.

❑❑

8 functions including maintained and momentary versions.

❑❑

1 to 4 pole configurations.

❑❑

12 terminal types including 9 for PC board mounting.

Other types include quick-connect and wire-wrap.

❑❑

6 bushing styles from 6 (.236) plain to 11,9 (15/32) threaded.

❑❑

3 types of finish including military black.

❑❑

4 approvals (UL - CSA - VDE - CECC) and 3 listings.

❑❑

4 types of sealing for terminal or front panel requirements.

❑❑

Numerous accessories available for actuator and bushing

options.

Summary of content (22 pages)

PAGE 1
5000 series Toggle switches Distinctive features THE WIDEST RANGE IN MINIATURE SWITCHES A ❑ 17 actuators including toggles, paddle levers and locking levers in different lengths. ❑ 5 contact materials from dry circuit to 6A 125VAC and high inrush up to 120A 2 ms. ❑ 8 functions including maintained and momentary versions. ❑ 1 to 4 pole configurations. ❑ 12 terminal types including 9 for PC board mounting. Other types include quick-connect and wire-wrap. ❑ 6 bushing styles from 6 (.
PAGE 2
5000 series Toggle switches Specifications ELECTRICAL SPECIFICATIONS • Current/voltage rating with resistive load : Contact Maximum Minimum Level* Silver (A) 3A 250VAC - 6A 125VAC - 4A 30VDC 50mA 10VDC III and IV Silver, gold plated (AD) 3A 250VAC - 6A 125 VAC - 4A 30VDC Gold plating withstands up to 100mA 30VDC 10mA 50mV 10µA 5V I to IV Brass, gold plated (CD) 0,4 VA at 20VAC or DC 10mA 50mV 10µA 5V I and II • For inductive, lamp or capacitive load, consult factory.
PAGE 3
5000 series Toggle switches Overview 5 Number of poles SERIES A 3 4 5 6 Terminals Single pole Double pole Three pole Four pole Solder lugs or straight PC depending on model Solder lugs with Ø 11,9 (15/32) bushing (5600 switches) Wire wrap (for 5200 switches only) Right angle, horizontal mounting (5200 - 5400 switches) Right angle, vertical mounting (5200 - 5400 switches) Blank M MIWR W WW Terminals and bushing 0 1 2 3 4 5 6 7 9 Straight PC terminals, 5,08 (.
PAGE 4
5000 series Toggle switches Overview Finish Fluorescent tip Blank Bright chrome finish G Matt black finish on bushing, actuator and hardware. Contact materials A AD CD Silver Silver, gold plated Brass, gold plated For peak currents, see X814, under Special Options. Special options Blank None 0.
PAGE 5
000 series Toggle switches - solder lug terminals Threaded bushing Ø 6,35 (1/4) : 5600 • 1, 2, 3 and 4 pole configurations 3.70 (.145) 1.90 (.074) ➞ Keyway 1.10 (.043) A 1 2 3 1.80 (.070) MODEL STRUCTURE Shown with standard lever (-13) ➞ Keyway I 1-2 I 2 II 1 III 8.00 (.314) 0.80 (.031) 10.50 (.413) Ø6.35-40UNS (1/4-40UNS) ➞ Keyway 1.00 (.039) 12.00 (.472) 12.00 (.472) 6 I 2 5 II 13.20 (.519) 3 III 5646 ON ON 10.50 8.00 (.413) (.
PAGE 6
5000 series Toggle switches - solder lug terminals Threaded bushing Ø 6,35 (1/4) : 5600 II 7 10 III Ø6.35-40UNS (1/4-40UNS) 8.00 (.314) A 1.80 (.070) 10.50 (.413) 21.20 (.834) 13.20 (.519) 0.50 (.019) 3.70 (.145) 24˚ I 11 ON ON MOM MOM MOM ON MOM MOM 13.10 (.516) 0.80 (.031) OFF OFF OFF ON ON ON 12 8 Ø3.00 (.118 DIA) ON ON MOM ON ON ON ON MOM 5666 5669 5667 5668 5662 5664* 5664 1R* 5664 2R* 9 4.70 (.185) III II I 2-3 1-2 5-6 4-5 8-9 7-8 11-12 10-11 1.00 (.039) 4.75 (.
PAGE 7
5000 series Toggle switches - solder lug terminals 5700 models • Flatted bushing Ø 6,35 mm (1/4) • 1, 2, 3 and 4 pole configurations A Diagram as per 5600 model MODEL STRUCTURE For model structure numbers, refer to 5600 models and replace 6 with 7. PANEL CUT-OUT Ø6.50 (.255 DIA) 2.70 (.106) Standard or with K sealing option 5500 models • Threaded bushing Ø 6 mm x 0.75 SI (.236 x 0.
PAGE 8
5000 series Toggle switches - solder lug terminals Threaded bushing Ø 11,9 (15/32) : 5600M • 1, 2, 3 and 4 pole configurations • Supplied with 2 hex nuts and 1 locking ring • Panel thickness up to 6 mm (.236) 3.70 (.145) 1.90 (.074) ➞ Keyway 1.10 (.043) 1 2 1.80 (.070) 3 MODEL STRUCTURE Shown with standard lever (-24) ➞ II 7.00 (.275) I 1-2 3.70 (.145) 11.00 (.433) I 0.50 (.019) III 2-3 2 II 1 3.70 (.145) 5 1 4 ON ON MOM MOM MOM ON MOM MOM II III 17.50 (.688) 0.80 (.
PAGE 9
5000 series Toggle switches - solder lug terminals Threaded bushing Ø 11,9 (15/32) : 5600M ➞ Keyway 10 II ON ON MOM MOM MOM ON MOM MOM 0.50 (.019) 11 1 24˚ 2 III 4.70 (.185) 13.20 (.519) 12 3.70 (.145) 17.50 (.688) 11.90 (.468) 4.75 (.187) 1.80 (.070) A OFF OFF OFF ON ON ON I 3 Ø5.00 (.196 DIA) ON ON MOM ON ON ON ON MOM 5666M 5669M 5667M 5668M 5662M 5664M* 5664M 1R* 5664M 2R* 12.10 (.476) 21.20 (.834) III II I 2-3 1-2 5-6 4-5 8-9 7-8 11-12 10-11 0.80 (.031) Four pole Ø11.
PAGE 10
5000 series Toggle switches - straight PC terminals Threaded bushing Ø 6,35 (1/4) : 5200 • Terminal spacing 4,7 mm (.185) • 1, 2, 3 and 4 pole configurations • Epoxy sealed terminals standard 1 2 5.30 (.208) For new projects, we recommend switches with support bracket (option Y) which holds the switch securely on the PCB. Other terminal lengths presented under "Special options". Also available with plain bushing, see "Special options" X371 3 4.00 (.157) ➞ Keyway 1.10 (.
PAGE 11
5000 series Toggle switches - straight PC terminals Threaded bushing Ø 6,35 (1/4) : 5200 - 5000 ➞ Keyway III 10.50 (.413) 4.70 (.185) 8.00 (.314) Ø1.60 (.063 DIA) Ø6.35-40UNS (1/4-40UNS) 4.75 (.187) 4.75 (.187) ON ON MOM MOM MOM ON MOM MOM 13.20 (.519) 10 0.50 (.019) II 7 24° I 11 21.20 (.834) 1.10 (.043) A OFF OFF OFF ON ON ON 12 8 Ø3.00 (.118 DIA) ON ON MOM ON ON ON ON MOM 5266 B 5269 B 5267 B 5268 B 5262 B 5264 B* 5264 1R B* 5264 2R B* 9 4.00 (.157) 14.40 (.567) 1.00 (.
PAGE 12
5000 series Toggle switches - straight PC terminals 5400 models • Threaded bushing Ø 6,35 mm (1/4) • Terminal spacing 4 mm (.157) • 1, 2, 3 and 4 pole configurations A Diagram, as per 5200 model MODEL STRUCTURE For model structure numbers, refer to 5200 models and replace 2 with 4. Panel cut-out, see 5200. 5900 models ➞ Flat • Flatted bushing Ø 6,35 mm (1/4) • Terminal spacing 4,7 mm (.
PAGE 13
5000 series Toggle switches - straight PC terminals 5100 models • Threaded bushing Ø 6 mm x 0.75 SI (.236 x 0.75 IS) • Terminal spacing 4,7 mm (.185) • 1, 2, 3 and 4 pole configurations A Diagram, as per 5200 model MODEL STRUCTURE For model structure numbers, refer to 5200 models and replace 2 with 1. Panel cut-out, see below. 5300 models • Threaded bushing Ø 6 mm x 0.75 SI (.236 x 0.75 IS) • Terminal spacing 4 mm (.
PAGE 14
5000 series Toggle switches - quick-connect terminals Threaded bushing Ø 6,35 (1/4) : 5200Z • Terminal spacing 4,7 mm (.185) • Epoxy sealed terminals standard • 1and 2 pole configurations 1 2 5.30 (.208) 6.50 (.255) ➞ Keyway 1.57 (.061) 3 MODEL STRUCTURE Shown with standard lever (-13) 13.10 (.515) I 1-2 2 24˚ II ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON - MOM 7.00 (.275) 3 I 1 III 10.50 (.413) 8.00 (.314) EPOXY Ø6.35-40UNS (1/4-40UNS) 1.57 (.061) Ø3.00 (.
PAGE 15
5000 series Toggle switches - quick-connect terminals 5900Z models • Flatted bushing Ø 6,35 mm (1/4) • Terminal spacing 4,7 mm (.185) • Epoxy sealed terminals standard • 1and 2 pole configurations A Diagram, as per 5900 model MODEL STRUCTURE For model structure numbers, refer to 5200Z models and replace 2 with 9. PANEL CUT-OUT Ø6.50 (.255 DIA) 2.70 (.106) Standard or with K sealing option 5100Z models • Threaded bushing Ø 6 mm x 0.75 SI (.236 x 0.75 IS) • Terminal spacing 4,7 mm (.
PAGE 16
5000 series Toggle switches - wire-wrap terminals Threaded bushing Ø 6,35 (1/4) : 5200MIWR 1 2 16.90 (.665) 18.00 (.708) • Terminal spacing 5,08 mm (.200) • Epoxy sealed terminals standard • 1and 2 pole configurations • Can also be used as extended PCB terminals ➞ Keyway 3 0.60 (.023) MODEL STRUCTURE Shown with standard lever (-13) ➞ Keyway I 1-2 2 24˚ II 3 I III ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON - MOM 10.50 (.413) 8.00 (.314) EPOXY Ø6.35-40UNS (1/4-40UNS) Ø1.10 (.043 DIA) 5.
PAGE 17
5000 series Toggle switches - plain bushing Right angle terminals - horizontal : 5200W • Terminal spacing 4,7 mm (.185) • 1, 2 and 3 pole configurations Special switch 5200WX404 with reduced overall dimensions is presented under "Special options". A MODEL STRUCTURE Shown with standard lever (-13) 12.70 (.500) 12.00 (.472) II 24˚ 1.00 (.039) I 3 0.80 (.031) 6 6.00 11.00 (.236) (.433) 5.08 (.200) 13.50 (.531) III 2 5.08 (.200) 1.10 (.043) 7.40 (.291) 12.70 (.500) Ø1.60 (.062 DIA) 3.81 12.
PAGE 18
5000 series Toggle switches - plain bushing Right angle terminals - horizontal : 5400W SP 16.60 (.653) 8.30 (.326) 5200W 12.00 (.472) 6.00 (.236) 3.50 (.137) 7.00 (.275) PCB MOUNTING FOR DP A 3P 5400W models • Terminal spacing 4 mm (.157) • 1and 2 pole configurations Diagram, as per 5200W model MODEL STRUCTURE For model structure numbers, refer to 5200W single and double pole and replace 2 with 4. PC LAYOUT 5.08 (.200) 12.70 (.500) Ø1.60 (.062 DIA) 4.00 (.157) SP APEM www.apem.com 3.
PAGE 19
5000 series Toggle switches - plain bushing Right angle terminals - vertical : 5200WW • Pin spacing 3,81 mm (.150) • 1, 2, 3 and 4 pole configurations A MODEL STRUCTURE Shown with standard lever (-13) I 1-2 3 I 2 II 24˚ 1 III 0.80 (.301) 1.00 (.039) ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON - MOM 5.65 (.222) 5.08 (.200) 3.81 (.150) 6 I 2 5 II 24˚ 1 4 III 0.80 (.301) 1.00 (.039) ON ON MOM MOM MOM ON MOM MOM 5.65 (.222) 5.08 (.200) A-40 www.apem.com III 1.00 (.039) 12.70 (.
PAGE 20
5000 series Toggle switches - plain bushing Right angle terminals - vertical : 5200WW - 5400WW 13.10 (.515) III 13.20 (.519) 10 1.00 (.039) 12.70 (.500) 3.81 (.150) 5.08 (.200) 4.75 (.187) 3.81 (.150) 4.75 (.187) ON ON MOM MOM MOM ON MOM MOM 7.20 (.283) 3.00 (.118) II 24˚ 7 21.20 (.834) Ø1.60 (.062 DIA) 12.70 (.500) I 11 1.10 (.043) OFF OFF OFF ON ON ON 12 8 Ø6.25 (.246 DIA) ON ON MOM ON ON ON ON MOM 5266WW 5269WW 5267WW 5268WW** 5262WW** 5264WW* 5264WW 1R* 5264WW 2R* 9 12.50 (.
PAGE 21
5000 series Toggle switches - plain bushing • Epoxy sealed terminals standard • 1and 2 pole configurations 1.10 (.043) 8.50 (.334) 4.00 (.157) 5.30 (.208) Brackets reduce mechanical stress on solder joints and increase resistance to vibrations. Bracket material : tin plated steel. 9.80 (0.385) Straight PC terminals - bracket mounting : 5200Y 1.10 (.043) Y - Y6 A Y4 - Y7 MODEL STRUCTURE Shown with standard lever (-13) Short bracket - width 15,75 (.620) - single pole : 5230Y I 1-2 II 24˚ Ø6.
PAGE 22
5000 series Toggle switches - plain bushing Straight PC terminals - bracket mounting : 5200Y4 - Y6 - Y7 Tall bracket - width 15,75 (.620) : 5200Y4 3 0.40 (.015) 2 15.75 (.620) 3.18 (.125) II 24˚ I Ø3.00 (.118 DIA) Ø1.60 (.062 DIA) EPOXY 1.27 (.050) 1 6.35 (.250) 2 3 0.40 (.015) Tall bracket - width 19,05 (.750) : 5200Y7 ON ON MOM ON ON ON ON MOM OFF OFF OFF ON ON ON ON ON MOM MOM MOM ON MOM MOM II 24˚ I 13.10 (.515) Ø1.60 (.062 DIA) EPOXY 1.27 (.050) 6.35 (.250) 19.05 (.750) 6.35 (.