Datasheet
SERIES
13
BASIC PART NUMBER
3
Single pole
4
Double pole
NUMBER OF POLES
5
ON - MOM
ELECTRICAL FUNCTION
2
Straight PC terminals,
bushing Ø 6.35 (1/4)
4
Solder lugs, bushing
Ø 6.35 (1/4) or 11.9
(15/32)
Right angle terminals,
bushing Ø 6.35 (1/4)
TERMINALS AND BUSHINGS
BUILD YOUR PART NUMBER
13000 series
Professional quick-break
momentary pushbutton switches
TERMINALS
Blank
Solder lugs or
straight PC
depending on
model
W
Right angle,
horizontal
mounting
OPTIONS
A
Silver
AD2
Silver, gold plated
(2 micron gold)
CD
Brass, gold plated
CONTACT MATERIALS
Blank
Standard for Ø 6.35
(1/4) bushing
-4
4 mm (.157) long,
for Ø 11.9 (15/32)
bushing (X768)
-9
9 mm (.354) long,
for Ø 11.9 (15/32)
bushing (X768)
PLUNGERS
Blank
Epoxy sealed
terminals standard
K
Front panel sealing
by one O-ring and
sealing washer
Reinforced sealing, see X640
under "Special options".
SEALING
UL
CECC
Consult factory for
details of approved
models.
APPROVALS
U900
Ø 5 (.196)
U1140
Ø 8 (.314)
U1720
Ø 9.4 (.370)
U480
Ø 10 (.393) std
U630
Ø 15 (.590)
U2430
Square, height 4
(.157)
U2020
Square, height 6
(.236)
For models with Ø 4 (.157)
plunger only.
Blank
No special
requirement
X640
Reinforced sealing
by three O-rings
X935
C-ring on plunger
for positive stop
X768
Bushing Ø 11.9
(15/32) + front
panel sealing
(double pole only)
SPECIAL OPTIONS
FINISH
Blank
Brass, nickel plated
G
Black finish on
bushing, plunger
and hardware
CAPS
ABOUT THIS SERIES
Notice : please note that not all combinations of above numbers are available. Refer to the following pages for further information.
Sealing boots are available to protect the switches against dust and water. See "Sealing Boots" section of website.
Mounting accessories : standard hardware supplied with all models : 2 hex nuts 8 mm (.314) across flats, 1 locking ring
and 1 lockwasher. Standard and special hardware is presented in the “Hardware“ section of website.
ORDER
SEPARATELY.
On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart.
PANEL SWITCHES
3