Datasheet

ManualsBrandsApem ManualsNon-Illuminated Pushbutton SwitchesPushbutton Switch 1CO OFF-(ON)

• Max. current/voltage rating with resistive load :

- silver contacts (A-AD2) : 4 A 30 VDC

- gold plated contacts (CD) : 100 mA 30 V

• Minimum load (AD2-CD contacts) : 10 mA 50 mV, 10 µA 5 V min.

• Initial contact resistance : 10 mΩ max.

• Insulation resistance : 1,000 MΩ min. at 5 00VDC

• Dielectric strength :

1,000 Vrms 50 Hz min. between terminals

2,000 Vrms 50 Hz min. between poles and between terminals and frame

• Contact bounce : 2 ms max.

• Electrical life :

ELECTRICAL SPECIFICATIONS

Contacts Max. current/voltage rating Number of cycles

A 4 A 30 VDC 50,000

AD2

4 A 30 VDC

(gold plating : 100 mA 30 VDC max.)

20,000

CD 100 mA 30 VDC 50,000

Low level or mechanical life 150,000

• Torque : 1.25 Nm (.922 Ft.lb) max. applied to nut

• Standard panel thickness : 2 mm (.078 ) max.

• Total travel : 2 mm (.078)

• Operating temperature : -40 °C to +85 °C (-40 °F to +185 °F)

GENERAL SPECIFICATIONS

PC and panel mount models

Bushing Ø 6.35 (1/4) and 11.9 (15/32)

UL and CECC approved

DISTINCTIVE FEATURES

13000 series

Professional quick-break

momentary pushbutton switches

The company reserves the right to change specifications without notice.

PANEL SWITCHES

SW-13000-1808

Summary of content (6 pages)

PAGE 1
SW PANEL SWITCHES 30 -1 08 18 00 13000 series Professional quick-break momentary pushbutton switches DISTINCTIVE FEATURES PC and panel mount models Bushing Ø 6.35 (1/4) and 11.9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS • Max. current/voltage rating with resistive load : - silver contacts (A-AD2) : 4 A 30 VDC - gold plated contacts (CD) : 100 mA 30 V • Minimum load (AD2-CD contacts) : 10 mA 50 mV, 10 µA 5 V min. • Initial contact resistance : 10 mΩ max.
PAGE 2
Professional quick-break momentary pushbutton switches MATERIALS TERMINALS • Case : diallylphthalate (DAP) • Bushing : brass, nickel plated 1.20 (.047) • Housing : brass, nickel plated • Contacts : A : silver AD2 : silver, gold plated (2 micron gold) CD : brass, gold plated 2.50 (.098) 1.00 (.039) 9.50 (.374) 5.00 (.196) 1.70 (.
PAGE 3
Professional quick-break momentary pushbutton switches BUILD YOUR PART NUMBER BASIC PART NUMBER 13 SERIES TERMINALS AND BUSHINGS 2 Straight PC terminals, bushing Ø 6.35 (1/4) 4 Solder lugs, bushing Ø 6.35 (1/4) or 11.9 (15/32) Right angle terminals, bushing Ø 6.35 (1/4) NUMBER OF POLES 3 Single pole 4 Double pole ELECTRICAL FUNCTION 5 TERMINALS ON - MOM Blank W Solder lugs or straight PC depending on model Right angle, horizontal mounting OPTIONS ORDER SEPARATELY.
PAGE 4
Professional quick-break momentary pushbutton switches KEYWAY Ø 6.35 BUSHING SOLDER LUG TERMINALS : 13400 EPOXY MOM 2 3 Ø6.35-40UNS (1/4-40UNS) 4.00 (.157) 6.00 (.236) EPOXY 4.00 (.157) 1.00 (.039) ON 1 0.50 (.019) MOM 4.00 (.157) MOM 14.00 (.551) 13.40 (.527) ON Double pole 13245 6.00 (.236) Ø1.6 (.062 DIA) 0.70 (.027) 1-2 6.30 (.248) 1-3 Ø4.00 (.157 DIA) 6.00 (.236) 8.00 (.314) 9.50 (.374) 13235 0.50 (.019) KEYWAY Ø 6.
PAGE 5
Professional quick-break momentary pushbutton switches CONTACTS MATERIALS BASIC P/N A AD2 CD Silver Silver, gold plated (2 micron gold) Brass, gold plated PLUNGERS BASIC P/N Dash compulsory before plunger code. Blank Standard plunger for Ø 6.35 (1/4) bushing -4 4 mm (.157) long plunger for Ø 11.9 (15/32) bushing (X768 option) -9 9 mm (.354) long plunger for Ø 11.
PAGE 6
PANEL SWITCHES 13000 series Professional quick-break momentary pushbutton switches AGENCY APPROVALS BASIC P/N UL CECC Blank CECC 96401-001 No agency approval required. Availability UL : all models with silver or gold plated silver contacts CECC : consult factory for details of approved models. Marking To order switches marked UL or CECC, please complete above box with desired approval.