Phau Ntawv Qhia

INSTRUCTION SHEET
for: 2LT 016 14x-xxx
460 965-22 / 11.21
Material selection is of crucial importance to the vessel application. APELO lamps are o󰀨ered in a range of housing materials, care
must be taken to match the application and usage.
• APELO A1 Lamps feature a housing made from corrosion proof advanced thermal polymer. APELO A1 lamps are suitable for
all hull construction materials.
• APELO A2 Aluminum Lamps are most suitable for Aluminum hulls, and boats that only spend hours or days in the water and
are typically washed down between uses. These boats are commonly stored on boat trailers or in a dry stack environment, i.e
these lamps are never permanently submerged.
• APELO A2 Bronze lamps are suitable for hull materials such as composite and GRP, Timber and Steel (not Aluminum). The
special Hella marine Bronze composition is highly corrosion resistant and suitable for permanently submerged vessels.
Note: Galvanic corrosion can occur due to stray currents. These stray currents are known to cause havoc on any exposed metal
ttings, and extra care must be taken to avoid this scenario, when using metal bodied lamps.
The lens of the APELO lamps is made from a high performance Grilamid
®
material o󰀨ering unmatched resistance to impact, long term
UV exposure and commonly used cleaning chemicals and general liquid detergents. Please note that chemicals like Isopropyl Alcohol
(PIA) and Acetone should not be used as these will cause crazing and/or cracking.
TECHNICAL
A1 Blue/White
A1 RGB
A2 Blue/White
A2 RGB
Operang Voltage
Mulvolt 9-32V DC, 12/24V DC Nominal
Power Consumpon
20W
15W
30W
30W
Edge Light
NA
NA
Less than <2W
Less than <2W
Current Draw
1.7A @ 12V DC
0.9A @ 24V DC
1.25A @ 12V DC
0.7A @ 24V DC
2.5A @ 12V DC
1.3A @ 24V DC
2.5A @ 12V DC
1.3A @ 24V DC
Fuse requirements
Always use the smallest fuse that is rated to the size of the load.
Light Output (White)
1800 Lumen
NA
3000 Lumen
NA
Degree of protecon
IP68 / IP69: Suitable for submersion in operaon and high pressure water jet cleaning
Cercaon
EN55015 / CISPR 15, IEC60533, IEC61547, ICES-5
Blue Light Hazard
According to IEC 62471-2/TR:2009, classied as Risk Group 1 for all hazard categories
Warranty
5 years, refer warranty statement for more details.
PHYSICAL
A1 Blue/White
A1 RGB
A2 Blue/White
A2 RGB
Diameter
95mm / 3, 3/4”
Weight (inc. cable)
250g
300g
016.147-00x = 310g
016.147-10x = 600g
016.148-00x = 360g
016.147-10x = 650g
Material - Lens
Premium grade UV Stable, Impact resistant Nylon (Grilamid)
Material - Body
Corrosion proof Advanced Thermal
Polymer
016.147-00x + 016.148-00x
- Hard Anodized Aluminum
016.147-10x + 016.148-10x
- Marine Grade Bronze
MOUNTING
A1 Blue/White
A1 RGB
A2 Blue/White
A2 RGB
Mounng Circle
83.5mm / 3,
5/16”
Cable Length
2.5M / 8.2’
Cable Cores
2 Core, Tinned
5 Core, Tinned
2 Core, Tinned
5 Core, Tinned
Rec. Adhesive
3M 4200
Cable Hole size
15.5mm / 5/8”
Ideal Locaon
Transom mount, 100-500mm / 4”-20” under the water line.
(016.145-0xx) (016.146-0xx) (016.147-xxx)
(016.148-xxx)
Before you begin