User`s guide

Maintenance 40
Solution of usual problems
Find below the solution for common problems that may occur in the Maxpad™:
Problem found Possible Solutions
Maxpad™ does not turn on when the
Power Button is pressed on the lateral
menu
1. Verify if the equipment is connected
to the energy and if it has proper ten-
sion.
2. After pressing the Button Power
wait for a few seconds and check if
the indicative LED placed next to the
Power is on and which color is shown.
If after 30 seconds the LED is still yellow
but no images is shown on the screen,
press and release the Reset button
– General Key (check instructions on
page 37) and wait. If the equipment
does not initiate automatically try to
press again the Power Button and wait
around 30 seconds.
3. Verify if the Maxpad™ is in the input
(Source) HDMI. For this press HDMI key
and wait for a few seconds. After this
procedure touch the screen and wait
for 5 seconds.