Owner`s manual

FRONT WHEEL SPACER ADJUSTMENT
Wheel Further Out (more spacers inside wheel)
Stub Axle WheelSpacers
Wheel Further In (less spacers inside wheel)
Stub Axle WheelSpacers
FRONT TRACK
PROBLEM: “Understeer on turn-in to the apex of the corner”
Solution: Widen the front track by a 5mm wheel spacer at a time.
PROBLEM: “Oversteer or very sensitive front steering causing the rear to slide.”
Solution: Narrow the front track width by a 5mm wheel spacer at a time.
For setting the front track width, a good
starting point is...
‘Open’ type tyres – One 20mm spacer
and one 5mm spacer on the inside of
each front wheel.
‘High grip’ SL type tyres – One 20mm
spacer on the inside of each front wheel.
‘SL’ tyres – One 10mm spacer and one
5mm spacer on the inside of each front
wheel.
Junior kart on ‘SL’ tyres – One 10mm
spacer on the inside of each front wheel.
Midget/Rookie – One 10mm spacer and
one 5mm spacer on the inside of each
front wheel.
NOTE: When tightening the front
wheels, you should tighten the
nut just enough so that there is
no lateral movement of the wheel
or wheel spacers on the stub axle
shaft, though the wheel spacers
should still be able to spin using
your fingers.
FRONT TRACK 7