Owner's Manual

Step 1. Unscrew tank cap from the top of the tank (See Figure. 1).

(Counterclockwise)

Step 2. Place the funnel on the top of tank, and pour all of the

media into the tank (See Figure. 2).

Step 3. Once all of the media is installed, please remove

the funnel and tube cover. Very important (See Fig. 3).

Step 4. Obtain the timer control valve and verify the o-ring is

properly in place (See Figure. 4A).

Step 5. Screw the timer control valve tightly onto the top of the tank

(see Figure. 4B) (Clockwise).

Step 6. Connect the timer control valve transformer into an electrical outlet and the system tank

installation is complete.

Your tank media is properly installed. Great job! Please continue with system installation on

next page.

Preparing tank for installation instructions. Please follow

installation steps below:

Figure. 1

Figure. 3

Figure. 4B

Figure. 2

Figure. 4A

Counterclockwise to

unscrew Tank Cap