System information

Chapter 5: APEC Network Operation
95
5.10 Search
This is the same as Fig. 5-32. Please refer to section 5.6.17, playback.
5.11 FTP Upload
AP-5004 can upload snapshots from the camera using FTP to a predefined location in the event of an
alarm. Use the FTP Upload page to set FTP details.
Fig. 5-36
Under the Individual Settings, specify the type of event that causes the E-mail to be sent in the Type
field by choosing GPI , Motion Detect or Continuous. Fill in the start and stop time for the period of a
day to do FTP upload. The file name and directory for FTP are also necessary. Enable camera image
snapshot to be uploaded by selecting cameras in the Snapshot option.
ON the Ftp Server field, you can put domain name or IP address. But when domain name is used, you
need to set DNS IP address in System Configuration
The “file name “ field needs to pay particular attention. When it is empty, AP-5004 will generate the file
name automatically in following format : IP-CH#-yymmddhhnn-xx, where “IP” is the IP address of
AP-5004, “CH#” is the channel number of the camera ,”yymmddhhnn” is the year, date, time and “xx”
is the sequential number of that snapshot .If file name is entered, then, AP-5004 will always uses this
filename without change.
5.12 Playback
Click “Playback” to bring up Fig. 5-37 with Fig. 5-38 follows. Click List All to display the entire list.
There are some kinds of search :
1. By calendar – On Fig. 5-37, the yellow block is the date of today. The blue block is the date selected
for listing of record files. On May 8
th
, there were actually 24 files. We just showed a few of them on
the list.
2. By hour – As on Fig. 5-39, you can input the time you want and then click “Play File” to get the
record files of the date and time selected.
selectable GPI, Motion
Detection or continuous
when empty, AP-5004 will generate the
file name automatically in following
format :
IP-CH#-yymmddhhnn-xx
If file name is entered, then, AP-5004
will always uses this filename without
change.