System information

Chapter 5: APEC Network Operation
76
Chapter 5. APEC Network Operation
5.1 Introduction
AP-5004 can also be configured over a network using a PC running standard web browser. This
chapter covers network operation. Before you can access AP-5004 from remote PC client, you need to
install DCS Plug-in software. This is a one time effort. Please refer to Chapter 6 for how to install it.
5.2 Connecting
The AP-5004 GUI can be viewed from a Windows IE browser when the device is connected on the same
network as your PC or if it is connected through a cable or xDSL modem to the Internet. Refer to the
hardware manual for more information about making connections using the RJ-45 Ethernet (LAN) port.
Make sure that the AP-5004 is configured for Network running mode.
To access the AP-5004 from remote browser:
1. Open a browser window on a terminal that has network access to the AP-5004.
2. Type the IP address of the AP-5004 in the browser address bar.
Fig. 5-1
If everything is OK, you will get the image of Fig. 5-5 on your VGA screen.
Fig. 5-5
Default User Name: webmonitor
Default Password: oyo
playback button