System information

Chapter 4: IR Remote Control Operation
69
2. When the text record menu appears, Use the number buttons on the remote control to enter a new
value. The minimum record time is 30sec.
3. Press the Right arrow button to confirm.
4. Uses the Up and Down Arrow buttons to select POS Event or Text to record only when POS event
or text was detected.
5. Press the OK button when the value is set correctly.
4.4.6 Pre- Alarm
Use the Pre-Alarm function to determine how many frames are recorded before an alarm event occurs.
Each camera can be set separately and you can record up to 300 frames.
To set the Pre-Alarm frame capture:
1. Use the Up and Down arrow buttons to select Pre-Alarm option from the Record Setup menu.
2. Press the OK button to display the Pre-Alarm menu.
3. Use the Up and Down arrow buttons to select the camera to change from the list.
4. Press the Right arrow button to confirm.
5. Use the number buttons on the remote control to enter a new value.
6. Press the OK button when the value is set correctly.

4.5 Playback
Use the Playback function to display a list of all recordings stored on the AP-5004. Use the Up and
Down arrow buttons to select a recording to play back and press the OK button to confirm. The chosen