System information

Chapter 4: IR Remote Control Operation
66
4.4.1 AP-5004 Setup
Use the AP-5004 menu to set the AP-5004 (Digital Video Recorder) mode. Choose Cyclic Recording to
keep recording on the hard disk continuously. Choose Auto Stop to stop recording when the disk is full.
You can set an alarm to be generated when the hard disk is full and send notification through a beep,
E-mail, or text message.
To change the AP-5004 mode:
1. Select the Mode option from the AP-5004 submenu using the Up and Down arrow buttons on the
remote control.
2. Use the Left and Right buttons to select either Cyclic Recording, or Auto Stop.
3. Press the OK button to save changes.
4.4.2 Record schedule
You can set up to 16 record schedules that automatically record at given times and days.
To configure a record schedule:
1. From the Record Schedule menu, pick a schedule to change from the displayed list, using the Up
and Down arrow buttons.
2. Press the Right button to display the parameters for that schedule.