System information

Chapter 4: IR Remote Control Operation
62
Name - Type your user name.
Pass - Type your password.
Sender - Type the e-mail address of the sender.
Test - Checks the validity of the provided E-mail address by sending E-mail.
5. Press the Right arrow button to confirm your selection.
6. Press the Key Pad button on the remote control to display the on-screen keyboard.
7. Use the Arrow keys to select the letters you need to complete the field and press the OK button to
confirm.
8. When the field is complete, press the Key Pad button to turn off the on-screen keyboard.
9. Press the OK button to save your changes.
Video Popup
Use the Video Popup menu to set up the time period for which the video from the selected camera is
displayed on your screen. The default screen is 20 seconds.
To set the video popup time:
1. Use the Up and Down arrow buttons to select the Video Popup option from the Alarm menu.
2. Use the Left arrow button to decrease the popup time and the Right arrow button to increase the
time
3. Press the OK button to save your settings.
Set Action
Use the Set Action option to define what action is taken by the AP-5004 when an event occurs. The
following options are available:
Video Lost - generates an alarm when the video from the selected camera is not available.
Disk Space Low - generates an alarm when the disk space is insufficient.
Disk Error - generates an alarm if there is an error while accessing the disk.
POS Event - generates an alarm if there is an error while integrate pos data with video.
To configure events using the Set Action option:
1. Use the Up and Down arrow buttons to select an event from the list.
2. Press the Right arrow button to display the submenu for the event with the following options:
Message - displays a message on screen when the event occurs.
Beep - sounds a beep when the event occurs.
E-Mail - sends an E-mail to the specified address when the event occurs.
Voice Call – this function is not supported.
Video Popup - displays the video from the selected camera on your screen.
3. Use the Up and Down buttons to select the desired action from the following options: