System information

Chapter 4: IR Remote Control Operation
56
Deinterlace - Software –> based De-interlace support.
Use the Up and Down arrow buttons on the remote control to select any one of the displayed parameters
and use the Left and Right buttons to cycle through the available options. Press the OK button when
parameters are set correctly.
4.3.6 OSD text
A line of text can be displayed with the video from each camera connected to the AP-5004. Use the OSD
Text menu to enable the text and alter it. You can also set the position of the text using the X and Y
parameter values. Increasing the value of Y moves the text down the screen. Increasing the value of X
moves the text to the right.
To alter the text position:
1. Use the Up and Down arrow buttons on the remote control to highlight X or Y.
2. Use the Right button to increase the value and the Left button to decrease the value.
3. Press the OK button when the value is correct.
Use the on-screen keyboard to alter the OSD text as follows:
1. Use the Up and Down arrow buttons on the remote control to highlight the Text option.
2. Use the Right arrow button to confirm.
3. Press the keypad button on the remote control to display the on-screen keyboard.
4. Use the Arrow buttons to highlight the letters you need for your text and press the OK button to
choose them.
Keypad button