System information
Chapter 4: IR Remote Control Operation
54
1. Use the Up and Down arrow buttons to highlight the Timeout field.
2. Use the Right arrow key to increase the value and the Left arrow key to decrease the value.
3. Press the OK button to confirm the new value.
You can set and recall up to 6 preset configurations for each camera using the following buttons in the
PTZ control section:
Preset - save the current pan, tilt, zoom, and focus settings in one of 6 preset configurations.
Recall - recall the selected preset configuration.
ZOOM - adjust the zoom to provide a more closer or wider view of the subject.
FOCUS - adjust the focus of the camera.
Speed - Adjust the speed of the selected PTZ camera.
Pan and tilt - Adjust the pan and tilt of the selected camera.
4.3.3 Video input
This function is to map physical camera video inputs on AP-5004 cards to the video positions on local
display. Normally, video input#1 is map to position #1. But you actually can set video
inputs to any position from #1 - #16, (depends on how many AP-5004 cards you install) on the screen as
long as there is vacancy.
4.3.4 Disks
Use the Disks menu to add and remove network disks from the system. Network disks can be used to
provide more storage space for long time recording .
To add a network disk:
1. Highlight the disk you want to add and press the OK button.
2. When the Add Disk screen is displayed, press the OK button.