System information

Chapter 4: IR Remote Control Operation
50
Chapter 4. IR Remote Control Operation
4.1 Introduction
This chapter covers remote control operation using IR remote controller. The AP-5004 must be in IR
remote control running mode for this operation.
4.2 Main menu
Press the Menu button on the remote control to display the main menu on screen.
Use the Up and Down arrow buttons to select one of the four options and press OK button to confirm
your choice.
4.3 System setup
The System Setup menu enables you to change many different parameters of the AP-5004. This section
describes each option in the System Setup menu.
Use the Up and Down arrow buttons to highlight an option, and use the OK button to confirm your
choice. You can move between pages using the Prev Page and Next Page buttons on the remote control.
Menu button