System information

Chapter 3. Graphic User Interface (GUI)
49
Note: The text was captured from the POS machine; you should check what text will be sent from
the POS machine, then set appropriate text in POS Event.
3.17 Motion Detection
You can set up Motion detection parameters for each camera on the screen of Fig. 3-71
The Procedure is :
1. Camera: Select the camera you want to do configuration.
2. Enable (Yes/No): Turn On/Off the motion detection function.
3. Sensitivity: Select sensitivity level default value is 50.
4. Use mouse drag on the screen and left click to set the detection area. Right click to clear the
detection. Or you can left click the small square rectangles to enable or right click to clear the
detection areas. Click OK to save changes.
1
2
3
4
Fig. 3-70
Fig. 3-71
Fig. 3-71