System information

Chapter 3. Graphic User Interface (GUI)
40
3.14.22 Configuration File:
You can backup or restore system configuration into a file for future restore in case of something
wrong that causes loss of configuration, or restore it to another machine in case it has similar functions.
Backup configuration data:
1. Connect a USB flash to DVR for backup or restore configuration data. DVR will auto detect flash.
2. Select backup section and click a device, which is shown in the field.
3. Click “Backup” button to start to backup configuration data.
4. When user sees “vpcfg _ your DVR name _ Mac ID.bin” was saved in the field, it mean the backup
was done.
5. Click “ok” button to leave system setup menu.
Restore configuration data:
1. Select restore section and click a device, as Fig. 3-55
2. Select one “*.bin” in the field.
3. Click “Restore” button will pup-up a menu to ask you to over write data. Select “ok” to start to
restore configuration data.
4. When restore data action was done, system will ask you to reboot DVR. Press “ok” to reboot DVR.
5. After restart DVR, user will get the configuration setup data back.
Fig. 3-55
back up device detected