System information

Chapter 3. Graphic User Interface (GUI)
14
Fig. 3-10. You can also zoom in specific point of the image to get clear view.
Brightness Contrast Sharpness Zoom-in Restore
3.3.4. Status Button
The status panel displays the playback status of the current record. The aqua line (Data) indicates
record data over an one hour time interval, as Fig. 3-8.
Click “motion status button” on Fig. 3-10 to show motion status of the record file. The yellow bars
(Motion) indicate the instance when motion was detected. On Fig. 3-10, camera#1 had
motion trigger started from around 22:00 till 32:00 minutes in this hour.
Fig. 3-10
Click GPI status button to show GPI trigger status of the record file as Fig. 3-11. The vertical small
orange bars indicate when GPI events were detected.
The vertical yellow line on Fig. 3-10 is the playback cursor. Click anywhere on the Data, Motion, or
GPI lines to start playback from that point.
Smooth
motion trigger
indication
GPI triggers detected
Fig. 3-11
play back cursor
motion
status
button
GPI status
button