Instructions / Assembly

Step 3. Connect flexible pipe PIPE1002 from the Pre-filter Housing OUTLET, into the INLET of the
bypass valve on the Stage 1 water treatment system, screw the compression fitting. See Fig.5.
Step 4. Connect PIPE1001 into the OUTLET of the Stage 1 bypass valve, and connect the other
compression port into the INLET of Stage 2 bypass valve. Hand-tightening is recommended.
See Fig.5.
Fig.5
PIPE1002
Stage 1
APEC
Carbon
System
PIPE1001
Pre-filter
Housing
Stage 2
APEC
Salt-free
Water
System
Bypass
Valve
In
Out
In
Out
Fig.6
PIPE1001PIPE1002
Stage 1
APEC
Carbon
System
Stage 2
APEC
Salt-free
Water
System
Bypass
Valve
Step 5. Connect PIPE1002 into the OUTLET of Stage 2 bypass valve, screw the compression fitting.
Hand-tightening is recommended. See Fig.6.
Step 6. Connect PIPE1002 into water pipe going into the home. Push the flexible pipe QC port
into water pipe, please slightly pull on the pipe to ensure the pipe connection is completely
secured. See Fig.6.
PIPE1002
Main
Water
Pipe
Pre-filter
Housing
In Out In
Out
4
QC port
Compression
Fitting
Compression
Fitting