Instructions / Assembly

3. For Porcelain Sink: Porcelain enameled sinks can readily be chipped if care is not exercised

when drilling the hole. Before starting the drill motor, apply firm downward pressure on the

bit until a crunching occurs. This will help keep the drill bit from walking when starting the

hole. A small pilot hole will also aid the drill bit.

Note: Immediately after the hole drilling is done, clean up all metal chips, for metal chips

will stain the porcelain!!

Step 4: Mounting The Faucet

1. Mount the faucet as shown in

Fig. 5 below:

2. Connect the Clear output line to the faucet:

Screw the “Faucet Adapter” (provided) onto the faucet base, as shown in Fig. 5 above. Con-

nect the 3/8” Clear output line to the Faucet Adapter, simply push the line into the Adapter

tightly. NO Teflon tape needed here. (Note: Discard the un-used nut and sleeve in the faucet

kit).

3. 2 ways to dispense water from faucet: Push down on the black lever to fill a glass of water, or

lift up the lever into a locked position to fill a container or to drain the storage tank.

Fig. 5

Black Locating Washer

Lock Washer

Lock Nut

Faucet Adapter

Tubing

Counter Top

Opening

Chrome Base