User's Manual UPS control system

LASTXFER : U command or Self Test
SELFTEST : NO
STESTI : 336
DLOWBATT : 02 Minutes
DIPSW : 0x00 Dip Switch
REG1 : 0x00 Register 1
REG2 : 0x00 Register 2
REG3 : 0x00 Register 3
MANDATE : 01/11/99
SERIALNO : GS9903001147
BATTDATE : 01/11/99
NOMOUTV : 230.0
NOMBATTV : 24.0
HUMIDITY : N/A
AMBTEMP : N/A
EXTBATTS : 0
BADBATTS : N/A
FIRMWARE : 60.11.I
APCMODEL : IWI
END APC : Thu Dec 02 17:27:25 CET 1999
You should get pretty much the same output mixed in with html if you
execute upsfstats.cgi directly from a Unix shell in the cgi subdirectory as
explained above for upsstats.cgi and multimon.cgi.
Working Example:
To see a working example of the above programs, visit
http://www.apcupsd.com/cgi-bin/multimon.cgi.
Client Test Program:
When your Network Information Server is up and running, you can test it
using a simple program before attempting to access the server via your Web
server. The test program is called client.c and can be found in the examples
subdirectory of the source distribution. To build the program, when in the
examples directory, use something like the following:
cc client.c ../lib/libapc.a -o client
Then execute it:
./client <host>[:<port>] [<command>]
81