User's Manual UPS control system
Table Of Contents
- Apcupsd User's Manual
- Release Notes
- How To Use This Manual
- Basic User's Guide
- Planning Your Installation
- Building and Installing apcupsd
- After Installation
- Configuration Examples
- Testing Apcupsd
- Troubleshooting Your Installation
- Monitoring and Tuning your UPS
- Maintaining Your UPS
- Frequently-Asked Questions
- Apcupsd Bugs
- Advanced topics
- Customizing Event Handling
- Master/Slave Configurations
- Controlling Multiple UPSes on one Machine
- Support for SNMP UPSes
- Alternate Ways To Run The Network Information Server
- apcupsd System Logging
- Installation: Windows
- Windows Version of apcupsd
- Installation: Serial-Line UPSes
- Overview of Serial-Interface UPSes
- Connecting a Serial-Line UPS to a USB Port
- Connecting a APC USB UPS to either a PC USB or Serial Port
- Cables
- Smart-Custom Cable for SmartUPSes
- Smart Signalling Cable for BackUPS CS Models
- Voltage-Signalling Cable for "dumb" UPSes
- Other APC Cables that apcupsd Supports
- Voltage Signalling Features Supported by Apcupsd for Various Cables
- Voltage Signalling
- Back-UPS Office 500 signals
- Analyses of APC Cables
- Win32 Implementation Restrictions for Simple UPSes
- Internal Apcupsd Actions for Simple Cables
- RS232 Wiring and Signal Conventions
- Pin Assignment for the Serial Port (RS-232C), 25-pin and 9-pin, Female End
- Ioctl to RS232 Correspondence
- Testing Serial-Line UPSes
- Troubleshooting Serial Line communications
- Recalibrating the UPS Runtime
- DATA Logging
- Technical Reference
- Configuration Directive Reference
- apcupsd Status Logging
- Shutown Sequence and its Discontents
- APC smart protocol
- Apcupsd --- RPM Packaging FAQ
- Credits
- Kernel Config
SENSITIVITY <sets sensitivity
level> , 168
Sequence
Shutdown , 63, 176
Serial Communications: , 197
SERIALNO , 175
Server
Alternate Ways To Run The
Network Information ,
110
Configuration Directives Used
by the Network Informa-
tion , 160
Setting up and Testing the CGI
Programs , 71
Shutdown
Master/Slave , 180
Power Down During , 128
Shutdown Problems , 180
Shutdown Sequence , 63, 176
Shutown Sequence and its Discon-
tents , 176
Signalling
Voltage , 137
Signals
Back-UPS Office 500 , 138
Simple Configuration for a Simple
Signaling or Dumb , 49
Simple Configuration for a Smar-
tUPS , 48
Simple Master Configuration , 49
Simple Slave Configuration , 50
Simple USB Configuration , 47
Simulated Power Fail Test , 59
SLAVE <name of slave(s)> used
only in MASTER config-
uration files. , 167
SLEEP <set sleep delay> , 169
Smart Protocol , 183
Smart Signalling Cable for Back-
UPS CS Models , 132
Smart-Custom Cable for Smar-
tUPSes , 131
SmartUPS
Simple Configuration for a ,
48
SmartUPSes
Smart-Custom Cable for , 131
snmp , 12
SNMP Specific Information , 109
Socket
Cannot open stream , 104
Read failure from , 105
Socket accept error , 104
SOLARIS Port: , 198
Source
Building the Win32 Version
from the , 129
Installation from , 27
Specifics
Operating System , 35
SSS
Cannot read magic from slave
, 103
Cannot write to slave , 103
Got slave shutdown from , 103
Standalome
Running apcnisd , 112
startselftest , 100
STARTTIME , 173
Startup , 181
STATFILE <file> , 164
STATFLAG , 174, 175
STATTIME<time> , 164
STATUS , 57, 173
Status bits , 188
STATUS Logging , 113
Status Logging On Serial-Line
UPSes , 157
Status Report Example , 171
Status Report Fields , 173
Status report format , 170
STESTI , 175
Subsystem
Checking Out Your USB , 17
Super USB bug fixer: , 197
Support for SNMP UPSes , 108
230