User's Manual UPS control system
Table Of Contents
- Apcupsd User's Manual
- Release Notes
- How To Use This Manual
- Basic User's Guide
- Planning Your Installation
- Building and Installing apcupsd
- After Installation
- Configuration Examples
- Testing Apcupsd
- Troubleshooting Your Installation
- Monitoring and Tuning your UPS
- Maintaining Your UPS
- Frequently-Asked Questions
- Apcupsd Bugs
- Advanced topics
- Customizing Event Handling
- Master/Slave Configurations
- Controlling Multiple UPSes on one Machine
- Support for SNMP UPSes
- Alternate Ways To Run The Network Information Server
- apcupsd System Logging
- Installation: Windows
- Windows Version of apcupsd
- Installation: Serial-Line UPSes
- Overview of Serial-Interface UPSes
- Connecting a Serial-Line UPS to a USB Port
- Connecting a APC USB UPS to either a PC USB or Serial Port
- Cables
- Smart-Custom Cable for SmartUPSes
- Smart Signalling Cable for BackUPS CS Models
- Voltage-Signalling Cable for "dumb" UPSes
- Other APC Cables that apcupsd Supports
- Voltage Signalling Features Supported by Apcupsd for Various Cables
- Voltage Signalling
- Back-UPS Office 500 signals
- Analyses of APC Cables
- Win32 Implementation Restrictions for Simple UPSes
- Internal Apcupsd Actions for Simple Cables
- RS232 Wiring and Signal Conventions
- Pin Assignment for the Serial Port (RS-232C), 25-pin and 9-pin, Female End
- Ioctl to RS232 Correspondence
- Testing Serial-Line UPSes
- Troubleshooting Serial Line communications
- Recalibrating the UPS Runtime
- DATA Logging
- Technical Reference
- Configuration Directive Reference
- apcupsd Status Logging
- Shutown Sequence and its Discontents
- APC smart protocol
- Apcupsd --- RPM Packaging FAQ
- Credits
- Kernel Config
Controlling Multiple UPSes
on one , 106
mainsback , 98
Maintaining Your UPS , 82
Making sure apcupsd Is Running ,
46
MANDATE , 175
Manual
Apcupsd User’s , 6
How To Use This , 9
MASTER <name of the master>
for slave machines. , 167
Master/Slave Configurations , 100
Master/Slave Problems , 101
Master/Slave Shutdown , 180
masterconnect , 100
mastertimeout , 100
MASTERUPD , 173
MAXLINEV , 174
MAXTIME , 173
MBATTCHG , 173
Messages
Alert , 189
MINLINEV , 174
MINTIMEL , 173
minutes , 163
MINUTES <battery runtime in
minutes> , 163
MMM
Bad APC magic from master:
, 105
Bad user magic from master:
, 105
Cannot resolve master name ,
104
Unauthorized attempt from
master , 105
MODEL , 173
Models
Smart Signalling Cable for
BackUPS CS , 132
Monitoring and Tuning your UPS
, 66
net , 12
NetBSD Port: , 198
NETPORT <IP port number> ,
166
NETSERVER [on , off] 160
NETTIME <time in seconds> ,
166
Network Problems with Mas-
ter/Slave or Server/Slave
Configurations , 103
New Features , 6
NISIP <IP-address> , 160
NISPORT <port> , 161
NOLOGON <specifies when
apcupsd should prevent
user logins> , 162
NOMBATTV , 175
NOMOUTV , 175
Notes
Developers , 115
Release , 6
NUMXFERS , 174
offbattery , 99
onbattery , 99
Once you have established serial
communications , 155
OpenBSD Port: , 198
Operating System Specifics , 35
Options
apccontrol Command Line ,
97
Compilers and , 34
Configure , 30
Other APC Cables that apcupsd
Supports , 136
other defines are used? , 196
OUTPUTV , 174
Overview of Serial-Interface UP-
Ses , 130
Packages
Installation from Binary , 26
Part Time Coders: , 198
228