User's Manual UPS control system
Table Of Contents
- Apcupsd User's Manual
- Release Notes
- How To Use This Manual
- Basic User's Guide
- Planning Your Installation
- Building and Installing apcupsd
- After Installation
- Configuration Examples
- Testing Apcupsd
- Troubleshooting Your Installation
- Monitoring and Tuning your UPS
- Maintaining Your UPS
- Frequently-Asked Questions
- Apcupsd Bugs
- Advanced topics
- Customizing Event Handling
- Master/Slave Configurations
- Controlling Multiple UPSes on one Machine
- Support for SNMP UPSes
- Alternate Ways To Run The Network Information Server
- apcupsd System Logging
- Installation: Windows
- Windows Version of apcupsd
- Installation: Serial-Line UPSes
- Overview of Serial-Interface UPSes
- Connecting a Serial-Line UPS to a USB Port
- Connecting a APC USB UPS to either a PC USB or Serial Port
- Cables
- Smart-Custom Cable for SmartUPSes
- Smart Signalling Cable for BackUPS CS Models
- Voltage-Signalling Cable for "dumb" UPSes
- Other APC Cables that apcupsd Supports
- Voltage Signalling Features Supported by Apcupsd for Various Cables
- Voltage Signalling
- Back-UPS Office 500 signals
- Analyses of APC Cables
- Win32 Implementation Restrictions for Simple UPSes
- Internal Apcupsd Actions for Simple Cables
- RS232 Wiring and Signal Conventions
- Pin Assignment for the Serial Port (RS-232C), 25-pin and 9-pin, Female End
- Ioctl to RS232 Correspondence
- Testing Serial-Line UPSes
- Troubleshooting Serial Line communications
- Recalibrating the UPS Runtime
- DATA Logging
- Technical Reference
- Configuration Directive Reference
- apcupsd Status Logging
- Shutown Sequence and its Discontents
- APC smart protocol
- Apcupsd --- RPM Packaging FAQ
- Credits
- Kernel Config
Disclaimer: NO WARRANTY ,
199
Discontents
Shutown Sequence and its ,
176
Distribution Maintainers: , 198
DLOWBATT , 174
doreboot , 98
doshutdown , 98
Driver
Sample NIS Slave Configura-
tion Using the Net , 51
DSHUTD , 174
Dumb
Simple Configuration for a
Simple Signaling or , 49
dumb , 12
DWAKE , 174
EEPROM
Configuring Your , 79
Programming the UPS , 194
EEPROM Values , 192
Email Notification of Events , 127
emergency , 98
End
Pin Assignment for the Serial
Port RS-232C 25-pin and
9-pin Female , 148
END APC , 175
endselftest , 100
EPROM
Configuration Directives Used
to Set the UPS , 168
Error
Socket accept , 104
Establishing Serial Port Connec-
tion , 150
event , 97
Events
Apcupsd Notification and , 70
Email Notification of , 127
EVENTS Logging , 114
EVENTSFILE <filename> , 161
Example
Status Report , 171
Examples
Configuration , 47
EXTBATTS , 175
FACILITY<log-facility> , 165
Failed
Connect to slave SSS , 104
failing , 98
Failures
Configuration Directives used
during Power , 161
FAQ
Apcupsd — RPM Packaging ,
195
Features
New , 6
Fields
Status Report , 173
File
Checking Your Configuration
, 44
FIRMWARE , 175
Format
Status report , 170
Former Code Maintainer and
Project Manager: , 197
Frequently-Asked Questions , 90
Full Power Down Test , 62
Functions
Utility , 125
General Configuration Directives ,
159
Got slave shutdown from SSS , 103
Guide
Basic User’s , 9
Hackers
Diagram for cable , 182
Handling
Customizing Event , 96
Hard Core Coders: , 198
Have
226