User's Manual UPS control system
Table Of Contents
- Apcupsd User's Manual
- Release Notes
- How To Use This Manual
- Basic User's Guide
- Planning Your Installation
- Building and Installing apcupsd
- After Installation
- Configuration Examples
- Testing Apcupsd
- Troubleshooting Your Installation
- Monitoring and Tuning your UPS
- Maintaining Your UPS
- Frequently-Asked Questions
- Apcupsd Bugs
- Advanced topics
- Customizing Event Handling
- Master/Slave Configurations
- Controlling Multiple UPSes on one Machine
- Support for SNMP UPSes
- Alternate Ways To Run The Network Information Server
- apcupsd System Logging
- Installation: Windows
- Windows Version of apcupsd
- Installation: Serial-Line UPSes
- Overview of Serial-Interface UPSes
- Connecting a Serial-Line UPS to a USB Port
- Connecting a APC USB UPS to either a PC USB or Serial Port
- Cables
- Smart-Custom Cable for SmartUPSes
- Smart Signalling Cable for BackUPS CS Models
- Voltage-Signalling Cable for "dumb" UPSes
- Other APC Cables that apcupsd Supports
- Voltage Signalling Features Supported by Apcupsd for Various Cables
- Voltage Signalling
- Back-UPS Office 500 signals
- Analyses of APC Cables
- Win32 Implementation Restrictions for Simple UPSes
- Internal Apcupsd Actions for Simple Cables
- RS232 Wiring and Signal Conventions
- Pin Assignment for the Serial Port (RS-232C), 25-pin and 9-pin, Female End
- Ioctl to RS232 Correspondence
- Testing Serial-Line UPSes
- Troubleshooting Serial Line communications
- Recalibrating the UPS Runtime
- DATA Logging
- Technical Reference
- Configuration Directive Reference
- apcupsd Status Logging
- Shutown Sequence and its Discontents
- APC smart protocol
- Apcupsd --- RPM Packaging FAQ
- Credits
- Kernel Config
Index
/about , 129
/events , 129
/help , 129
/install , 129
/kill , 129
/remove , 129
/run , 129
/service , 129
/servicehelper , 129
/status , 129
—disable-install-distdir , 33
—enable-apcsmart , 31
—enable-cgi , 31
—enable-dumb , 31
—enable-master-slave , 31
—enable-net , 31
—enable-nis , 32
—enable-powerflute , 31
—enable-pthreads , 32
—enable-snmp , 31
—enable-test , 32
—enable-usb , 31
—prefix , 30
—sbindir , 31
—with-cgi-bin , 31
—with-css-dir , 31
—with-libwrap , 32
—with-lock-dir , 32
—with-log-dir , 32
—with-net-port , 33
—with-nis-port , 33
—with-nisip , 33
—with-nologin , 32
—with-pid-dir , 32
—with-pwrfail-dir , 32
—with-serial-dev , 32
—with-upscable , 33
—with-upstype , 33
2.0 User’s Manual: , 197
A: , 90–95
Q: , 90–95
a name , 90
Acknowledgements , 195
Advanced topics , 96
After Installation , 44
ALARMDEL , 174
Alert messages , 189
Alpha Port: , 197
Alternate Ways To Run The Net-
work Information Server ,
110
always , 163
AMBTEMP , 175
Analyses of APC Cables , 138
ANNOY <time in seconds> , 161
ANNOYDELAY <time in
seconds> , 162
annoyme , 97
Answers , 195
APC , 173
APC smart protocol , 181
Apcaccess , 67
Apcaccess Test , 55
Apccontrol Command Line Op-
tions , 97
apcmain , 54
APCMODEL , 175
apcnis , 54
apcser , 54
apcsmart , 12
223










