Specifications

SURT Stack/Rack-Mount 12U 14000/18000 VA 200 Vac 15000/20000 VA 208/240 Vac 14
Output wiring
Wiring must be performed by a qualified electrician.
Adhere to all national and local electrical codes.
Failure to follow these instructions may result in personal injury or equipment damage.
Connect load to UPS
There are two ways to connect the load to the UPS.
• Hardwire the load through the output wiring tray.
• Connect the load using the six output receptacles on the external battery pack.
Remove output wiring tray cover
Remove the screws that secure the cover and take the cover
off the tray.
If hardwiring the load continue to the section below,
Hardwire the load.
If connecting the load using the six output receptacles on the
external battery pack, skip to “Install output wiring tray in
UPS” on page 15.
Su0169b