Specifications

SURT Stack/Rack-Mount 12U 14000/18000 VA 200 Vac 15000/20000 VA 208/240 Vac 12
Input wiring
Wiring must be performed by a qualified electrician.
Adhere to all national and local electrical codes.
1. Install a utility circuit breaker in accordance with local electrical codes.
2. Switch utility circuit breaker OFF.
3. Remove the screws that secure the covers and take the covers off the tray.
4. Remove appropriate circular knockouts from input wiring tray.
5. Install appropriate strain-relief (not supplied), on hardwired input power cables.
6. Connect ground terminal first. Then connect the remaining wires. Route wires through knockout
holes to terminal blocks. Refer to “Wiring Specifications” on page 11 and “Input hardwiring” on
page 13.
7. Secure wiring tray cover using screws removed in step 3 above.
Failure to follow these instructions may result in personal injury or equipment damage.
su0168a
Input wiring tray