User manual

SURT192RMXLBP2/SURT192RMXLBP2J User Manual 7
Connect UPS, battery pack and XLBP
Units may vary in appearance from those depicted in this manual.
su0189a
su0208a
! Remove safety covers on
battery pack, and XLBP(s).
su0188a
su0190a
su0191a
UPS
Battery pack with
PDU installed
XLBP with no
PDU installed
" Connect batteries as shown.
# Rotate safety covers
$ Re-install safety covers.
Ensure all battery
connectors used and
unused, have safety
covers installed.
su0187a
% Connect ground wires as shown.
Ground
Ground
Ground
Thumb screw
Thumb screw
& Prior to connecting the battery pack to the UPS the safety cover
on the UPS battery connector must be adjusted.
• Loosen two thumb screws on safety cover.
• Slide safety cover so that battery connectors are exposed.
• Securely engage battery connectors.
• Slide safety cover to lock battery connectors in place.
• Tighten thumb screws.