User manual

SURT192RMXLBP2/SURT192RMXLBP2J User Manual 6

Install units in rack

Secure UPS, battery pack and XLBP in rack using cage nuts and ornamental screws included in package.

Four ornamental screws and two cage nuts must be used to secure each unit.

A cage nut must be used in the top hole of each rack-mount bracket when securing the unit in the rack.

The bottom hole of each rack-mount bracket can be secured using an ornamental screw in the threaded

hole.

Install and connect battery modules

Connect all eight battery modules. Failure to do so may cause equipment damage.

Replace battery compartment doors. Tighten screws to secure battery compartment doors.

Install bezels

There is a single latch on each side of the UPS bezel.

There are two latches on each side of the battery pack and

XLBP bezels.

su0183a

su0184a

7 holes

su0173a

su0185a

su0186a