Service manual
990-1008, Revision 1, 4/9939
7.15 Removing the Battery Temperature Sensor Board
1.
Switch off the Smart-UPS DP (7.1).
2.
Remove the cover (7.2).
3.
Remove the external DC-Supply (7.3).
4.
Open the Smart-UPS DP (7.4).
5.
Remove the internal DC-supply (7.5).
6.
Remove the external unit cables (7.6)
7.
Remove the two screws on the rear side of the system, which keep the board.
8.
Remove the battery temperature sensor board.
8