Service manual

990-1008, Revision 1, 4/9935
7.12 Removing the Measuring and Supply Board
1. Switch off the Smart-UPS DP (7.1).
2. Remove the cover (7.2).
3. Remove the external DC-Supply (7.3).
4. Open the Smart-UPS DP (7.4).
5. Remove the internal DC-supply (7.5).
6. Remove the external unit cables (7.6).
7. Remove the SmartSlot (7.7).
8. Remove the controller board (7.8).
9. Remove the power interface board (7.11).
10. Remove the stay.
11. Remove the X005 and X006 connectors.