Owners manual

23Smart-UPS On-Line SRT5K/6K Tower/Rack-Mount 3U/4U
Network Management Interface
Introduction
The UPS has a network port and console port that can be used to access the Network Management Interface. The
Network Management Interface is very similar to an AP9630 Network Management Card (NMC) that is integrated into
a UPS with one universal input/output port.
The Network Management Interface and the AP9630 NMC have the same firmware, operation modes and interaction
with other APC products such as PowerChute Network Shutdown.
Refer to the Network Management Card utility CD supplied with this product.
Features
The Network Management Interface allows the UPS to function as a Web based, IPv6 ready
product.
The Network Management Interface can manage the UPS using multiple open standards such as:
The Network Management Interface:
Provides UPS control and Self Test scheduling features.
Provides data and event logs.
Enables you to set up notifications through event logging, e-mail, and SNMP traps.
Provides support for PowerChute Network Shutdown.
Supports using a Dynamic Host Configuration Protocol (DHCP) or BOOTstrap Protocol (BOOTP) server to
provide the network (TCP/IP) values.
Supports use of Remote Monitoring Service (RMS).
Provides the ability to export a user configuration (.ini) file from a configured UPS, to one or more unconfigured
UPS without conversion to a binary file.
Provides a selection of security protocols for authentication and encryption.
Communicates with StruxureWare Central and InfraStruxure Manager.
Supports one universal input/output port for connection to a:
Temperature probe, AP9335T (supplied)
Temperature/humidity sensor, AP335TH (optional)
Relay input/output connector that supports two input contacts and one output relay, AP9810 Dry Contact I/O
Accessory (optional)
Hypertext Transfer Protocol (HTTP) Secure SHell (SSH)
Simple Network Management Protocol versions 1
and 3 (SNMPv1, SNMPv3)
Hypertext Transfer Protocol over Secure Sockets
layer (HTTPS)
File Transfer Protocol (FTP) Secure Copy (SCP)
Telnet Syslog
RADIUS