Datasheet

9Smart-UPS On-Line SRT2200/SRT3000 Tower/Rack-Mount 2U
 Controllable
outlet group 1
Connect electronic devices to these outlets.
 Chassis ground
screws
The UPS and XLBPs have ground screws for connecting the ground leads. Prior to
connecting a ground lead, disconnect the UPS from mains power.
 Controllable
outlet group 2
Connect electronic devices to these outlets.
 EPO terminal The Emergency Power Off (EPO) terminal allows the user to connect the UPS to a central
EPO system.
 Serial Com The Serial Com port is used to communicate with the UPS.
Use only interface kits supplied or approved by APC by Schneider Electric. Any other
serial interface cable will be incompatible with the UPS connector.
 USB port The USB port is used to connect either a server for native operating system
communications, or for software to communicate with the UPS.
Note: Serial and USB communication should not be used simultaneously. Use either the
Serial Com or the USB port.