Datasheet

Smart-UPS On-Line
SRT10KXLT shown
apc.com 7
Proven performance with the world’s largest installed base
of single-phase, double-conversion products.
Rackmount and tower SRT 2.2 kVA – 10 kVA
Additional features
Embedded network management card with
environmental monitoring (5 kVA – 10 kVA models)
Remote monitoring and controlofthe UPS and
the environment viaEthernet connection while
freeing up the SmartSlot
TM
so customers can add
accessories for additional communication options.
Switched outlet group(s)
Ability to control a group of output load receptacles
independent from the main UPS. Enables:
• Rebooting hung device without cycling
the entire UPS
• Sequenced turn ON/OFF
• Shedding of noncritical loads based on a variety
of parameters (battery time, runtime remaining,
and overload)
• Scheduled time OFF to conserve energy
Emergency power off
Remote UPS shutoff in the event of a fire or other
emergency. The UPS can accept normally open
(NO) or normally closed (NC) contacts.
Communication ports
Serial, USB, Ethernet, and SmartSlot for network
accessory cards.
Communication protocols
Modbus serial, USB PowerSummary, HTTP, SNMP,
and Telnet.
1:1, 3:1 input hard-wire options
Product can be wired for 3-PH or1-PH input
(230 V, 8 kVA, and 10 kVA modelsonly).
Dual input
Enables second input source to be connected to
UPS bypass (230 V, 8kVA, and 10kVA models only).