Specifications

The Meaning of LED Indicators
Chapter 10 Troubleshooting Snap Servers 85
Snap Server 14000 Status & Drive Light Behavior
This section describes the LED indicators on the Snap Server 14000’s disk drives,
power modules, and fan modules.
Disk Drive Indicators
If a disk drive fails on a Snap Server 14000, a failure message appears on the front
LCD status display. In addition, the disk drive status light below the failed drive
turns amber.
Solid amber The server has encountered a system error.
Blinking green then
amber
The server has booted to maintenance mode. For more
information, see “Using Maintenance Modes to Perform System
Resets” on page 93.
LAN 1 and LAN 2 LEDs
Solid green The server is active and connected to the network on the network
port.
Off The port is disconnected or the Ethernet cable is not connected or
linked to an active switch.
System LED
S
y
s
t
e
m
L
in
k
LCD status display
Disk drive status lights
appear on the front of the
server—one light below
each drive.