Specifications

The Meaning of LED Indicators
90 Snap Server Administrator Guide
Snap Disk 10 Disk Drive and Power Supply Module LEDs
This section describes the LED indicators on the Snap Disk 10’s disk drives and
power module.
Disk Drive LEDs
The Snap Disk 10 has two lights below each disk drive. The Status light (left)
indicates power. The Activity light (right) indicates drive activity.
The LEDs operate as described in the following table:
Power Module LEDs
The Snap Disk 10 power module has a single LED. The LED operates as described
in the following table:
Status light
Activity light
Status Light Activity Light Condition of Disk Drive
Green Amber, flashing Disk drive installed and being accessed
Green Not lit Disk drive installed but not being accessed
Amber Not lit Disk drive installed but not working properly
Not lit Not lit Disk drive removed from its bay
Power Light Condition of Disk Drive
Solid Green Power module is installed and working properly
Off Power module is disconnected, not fully seated, or has failed.