Specifications

The Meaning of LED Indicators
Chapter 10 Troubleshooting Snap Servers 87
Snap Server18000 Status & Drive Light Behavior
The server has two status lights, two network lights, and two lights for each of the
eight disk drives, as shown in the following illustration:
Power, System, and LAN LEDs
Looking at the server from the front, the lights appear in the following order, from
left to right: power LED, system LED, LAN 1 (Ethernet1) LED, and LAN 2
(Ethernet2) LED. The LEDs operate as described in the following tables:
Power LED
Solid green The server is powered on.
Off The server is powered off.
System LED
Double-blink green The server is booting up.
Triple-blink green The server is shutting down.
Solid or blinking
amber at boot time
A problem was detected by BIOS. The server will not boot.
Blinking amber during
normal operation
A thermal or other system problem was detected
LAN 1 and LAN 2 LEDs
Solid green The server is active and connected to the network.
Off The port is disconnected; or the Ethernet cable is not connected or
linked to an active switch.
1 2 3 4
56 78
Power LED
System LED
LAN LEDs
Disk Drive LEDs