Specifications

Initial Configuration Tasks
Chapter 2 Setup and Initial Configuration 35
4
If you are using two UPS devices, you can select automatic shutdown upon
receiving a message from one or both UPS devices.
5
Click
Save
.
Tip
The Snap Server 14000’s maximum load is 300 watts. The maximum load for
Snap Servers 4200, 4400, and 4500 is 160 watts. To determine how many hours of
service your UPS will supply, divide the watt hours of the UPS by the maximum
load the Snap Server draws. The result is the number of hours your UPS should
supply power to maintain your Snap Server.
Registering your Server
To register your server, navigate to the
System > Registration
screen and click the
Register online now
link.
A separate browser window opens to a product registration form in which some of
your product information is already entered. In addition, you may need to have the
following information available:
•Server number —
A numerics-only string
• Serial number —
A 10-character alphanumeric string
These numbers appear on labels affixed to the inside of your Snap Server. To view
the labels, remove the front bezel (4200, 4400, and 4500) or open the front door
(14000).