Specifications

Setting Up the Snap Server 4200/4500
22 Snap Server Administrator Guide
Power, System, and LAN LEDs
These status lights are located to the right of the power button. Looking at the
server from the front, the lights appear in the following order, from left to right:
power LED, system LED, LAN 1 (Ethernet1) LED, and LAN 2 (Ethernet2) LED.
They operate as follows:
Disk Drive LEDs
The Snap Server 4200/4500 has two lights below each disk drive. The left light
indicates power. The right light indicates drive activity. They operate as follows:
Power LED
Solid green The server is powered on.
Off The server is powered off.
System LED
Blinking green
(once per second)
The server is booted up and operating normally.
Solid amber The server has encountered a system error.
LAN 1 and LAN 2 LEDs
Solid green The server is active and connected to the network on the LAN 1
port.
Off The port is disconnected or the Ethernet cable is not connected/
linked to an active hub or switch.
Power LED (left) Activity LED (right)
Solid green Off Disk drive installed properly but is not active
Solid green Flashing amber Disk drive installed properly and actively
reading/writing information
Solid amber Off Disk drive installed, but not working correctly
Off Off No disk drive installed