User's Manual

Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U16
Operation
Using the display
These Smart-UPS models are equipped with an intuitive and configurable LCD display. This display complements
the software interface as they convey similar information and either may be used to configure the UPS settings.
The display consists of the following keys and indicators:
The display has two main display/menu options – standard and advanced.
Note: The standard menu is the default setting and does not contain all of the menus and attributes of the advanced
menu. The advanced menu automatically scrolls through multiple screens.
Standard menus
The Standard menus are the most commonly used menus. The following is a list of some items displayed in this
menu mode. Visit apc.com for additional details.
Main on/off
This button is used to turn the UPS output power on and off.
Quick status LEDs
The online indicator illuminates green when UPS output is turned on and operating on
AC power.
The on-battery battery indicator illuminates orange and the unit will continue to emit a
series of short beeps indicating that the UPS is operating on battery power.
The error detected LED will illuminate red if the unit detects an error condition. The
display screen may also indicate an error message or code.
The replace battery indicator illuminates red when the UPS battery does not pass self test
and requires replacement.
Escape
The escape key always returns the display to the previous screen. It is used to exit the
various display menus.
Return
The return key is used to confirm a selection and/or enter a menu.
Up/down selection arrows
The arrows are used to navigate through each menu selection.
Standard Menu Display
Advanced Menu Display
Menu General Functions
Status View UPS information:
• Operating Mode
• Efficiency
• Load Power
• Load VA
• Battery Charge state
• Estimated Runtime
• Battery Temp
• Input
• Output
• SmartConnect
• Probe 1, Probe 2, when NMC and sensor probes
are installed
Configuration Configures UPS settings:
• Language
• Green Mode
• Local Power Quality: Good, Fair, Poor
• Menu Type: Standard or Advanced
• Audible Alarm
• Display (Auto Dim, Auto Off, Always On)
• Reset to Factory Default
• SmartConnect Control
• Install FW?
Test & Diags Performs UPS tests and diagnostic functions:
• UPS Self Test
• UPS Alarms Test
• Calibration Test
su0983a
Load: 18%
Batt: 100%
su0984a
On Utility
Efficiency: 98%