User Guide

ManualsBrandsAPC ManualsComputer Accessories & PeripheralsAPC UPS 1500VA Smart-UPS with SmartConnect, Pure Sinewave UPS Battery Backup, Uninterruptible Power Supply (SMC1500C)

Smart-UPS C 1000/1500 VA 120/230 Vac Tower / Rack-Mount 2U 13

Output Voltage

Setting

• for 120V models: 110 -> 120 -> 127

• for 230V models: 220 -> 230 -> 240

Select the output voltage (not available on some models)

LCD Energy Save

Mode

• dP.0 = disable

•dP.1 = enable

dP.1 - Enabled (Default) - When enabled the LCD will

automatically dim after 60 seconds of no activity

dP.0 - Disabled - The display will stay illuminated

indefinitely.

Communication

Protocol

• cP.0 = disable

•cP.1 = enable

Enables / disables the Modbus communication protocol.

cP.1 (enabled) is the default.

Green Mode Enable

• 0: Disable

• 1: Enable

When Green Mode is enabled the UPS is operating at the

most efficient level by bypassing unused AVR

components while acceptable AC voltage is present. The

UPS will enter and exit Green mode automatically while

Enabled.

Enabled is the default.

SmartConnect remote

commands

• rc.0: remote control disable

• rc.1: remote control enable

When enabled, it allows SmartConnect to send

commands and configuration to the UPS.

rc.0, disabled, is the default.

Battery Replaced

• rb.0: No battery replacement

• rb.1: Battery replaced

rb.0 - Did not replace battery (default)

rb.1 - Battery has been replaced

Select rb.1 to indicate that the battery has been replaced,

this will reset the constants for the battery runtime

calibration to the default for a new battery.

Function Options Description

su0740l

su0740m

su0740n

su0740o