User manual

SRC96XLBP / SRC96XLBP2S User Manual 8
Install and connect batteries
This UPS is equipped with battery modules. Each module must be connected to battery connectors on
chassis.
1. Install batteries.
2. Connect internal batteries.
3. Replace battery compartment door and secure door
with screws previously removed.
Install bezel
1. Fit three tabs on inside edge of bezel into slots in chassis.
2. Tip bezel toward chassis. Fit two tabs on inside edge of bezel into
slots in chassis and snap bezel into position.
su0218a
x
2
x
2
x
2
su0226a
su0220a