User manual

SRC96XLBP / SRC96XLBP2S User Manual 7
Position unit for mounting in rack
The unit is heavy. Use caution when positioning
unit.
NOTE: The holes for securing rack-mount
brackets are plugged. Remove the appropriate
plugs prior to installing brackets on the unit.
Install rack-mount brackets
Four pan head screws and four
washers must be used to secure
each rack-mount bracket to unit.
Secure 2-post rack to floor
Install units in rack
The UPS and XLBPs should be installed at or near
bottom of rack. Always place the UPS above XLBPs.
Batteries must be removed from units prior to
installation in a rack.
Two screws (not supplied), must be used to secure each
rack-mount bracket to rack.
s
u
0
2
1
4
a
x8
s
u
0
2
1
5
a
x4
x4
su0248a
su0217a