Datasheet

1Smart-UPS® VT, MGE™ Galaxy™ 3500 10-40 kVA 400 V Installation
Safety
Save these instructions
This manual contains important instructions that must be followed during installation, operation, and
maintenance of the wall-mount version of the Smart-UPS VT, MGE Galaxy 3500 Maintenance Bypass
Panel (MBP).
Safety warnings
Caution: All wiring must be performed by a certified electrician or an APC-trained
individual who is familiar with the construction and operation of this equipment. Installation
must comply with local and national codes.
Warning: This product receives power from more than one AC source. Disconnect all
AC sources to completely de-energize the unit before servicing.
Warning: This product receives power from more than one AC source. Disconnect all
AC sources to completely de-energize the unit before servicing.
Warning: Ensure that the Maintenance Bypass Panel is not connected to electrical
power and that all switches are in the OFF position before installing or servicing the
unit.
Warning: Follow all wiring instructions exactly. Failure to do so may result in
permanent damage to the equipment.
Warning: Avoid contact with previously installed electrical wires and other potential
hazards that might be embedded in the wall chosen for installation.